Euphonix MC Media Application Controller, Operation Manual

Page: 66 / 120

Euphonix Media Application Controller Operation Manual Working with Channels
66
7.3 Assigning Tracks to Strips
The MC has four channel strips. The System 5-MC can have a virtually unlimited num-
ber of CM408Ts. The MC and CM408T strips can be scrolled independently. The
CM408T strips can have a Main and a Swap track assigned; the CM408T strip’s
Swap
key switches between Main and Swap layers.
When the MC connects to a workstation with EuCon DAW software (or Mackie Con-
trol Universal/HUI), it automatically populates the channel strips (System 5-MC auto-
matically populates the CM408Ts) with DAW tracks, putting track 1 on channel strip
1 and continuing sequentially. Deleting/adding tracks or changing track order automat-
ically updates the MC/CM408T strips.
7.3.1 Strips and Tracks
Any track can be assigned directly to a strip, similar to System 5’s mapping of channels
to strips. Direct Assigned tracks do not move when the
Nudge , Bank , and Home keys
are pressed.
Use the Assign Touchscreen to direct assign tracks to channel strips (the MC’s four
strips, or CM408T module channel strips for System-5 MC).
Figure 7-5 Assign Touchscreen