Euphonix Media Application Controller Operation Manual
Working with Channels
60
7.1.2
On
The
On
key must be lit (active) to hear the channel. The channel is muted when the
strip’s
On
button is unlit.
7.1.3
Record
Activate the
Record
key to enable (arm) a track for recording.
7.1.4
Chan Select Key
Press the
Chan Select
key to select the channel assigned to that strip. When lit, this
channel is selected in the DAW for editing.
Press the
Chan Select
key to select a workstation track; it lights when a track is selected.
The workstation’s tracks or mixer window scrolls to show the most recently selected
track.
7.1.5
Select Key
When pressed by itself, the
Select
key toggles Write mode on/off for the entire track.
LEDs
The
green
R
and red
W
LEDs
are used to denote the automation modes shown in Table
7-1. To set the automation mode, press and hold the
Wave
key and press the
Select
key
to select from the popup menu. In Write mode, the red
W
LED blinks when writing au-
tomation and is solid otherwise.
Table 7-1
Automation Modes
In Write mode, the red LED blinks when writing automation, and lights solid when the
transport is stopped.
NOTE: The yellow G LED is reserved for future use.
Mode
R LED (green)
W LED (red)
Isolate
off
off
Read
on
off
Write
off
on
Read + Write
on
on
Summary of Contents for MC Media Application Controller
Page 28: ...Euphonix Media Application Controller Operation Manual Installation and Configuration 28...
Page 34: ...Euphonix Media Application Controller Operation Manual Main Touchscreens 34...
Page 54: ...Euphonix Media Application Controller Operation Manual Soft Keys 54...
Page 82: ...Euphonix Media Application Controller Operation Manual Studio Monitor Express Windows 82...
