Euphonix Media Application Controller Operation Manual
Introduction
12
1.1
Multiple Levels of Control
The MC uses four powerful levels of control:
•
Keyboard and trackball
•
Programmable key commands via the Soft Keys
•
HUI command protocol to control Pro Tools
•
Mackie Control Universal protocol for DAWs/media software that support it
(i.e., Digital Performer, Soundtrack Pro, Final Cut Pro)
•
EuCon control of EuCon-aware applications (i.e. Nuendo, Logic Pro, and Pyra-
mix)
1.1.1
Level 1: Keyboard and Trackball
The MC instantly accesses your applications using its full-sized keyboard and two
trackballs. Each trackball has a control ring and four user-programmable switches, al-
lowing both left and right-handed operation. One or both trackballs can be swapped out
for a jog/shuttle wheel, and the MC can be set to interpret the physical left and right edit
controllers as
left
or
right
, depending on the operator’s needs. For example, in large
dual-operator System 5-MC setups with two MCs, the left-side operator can use the
right-side MC’s left trackball as the
right
trackball or jog wheel. The trackball rings can
also be used for Wheel Edit Mode functions, like zooming, trimming, nudging and
moving clips.
1.1.2
Level 2: Soft Keys
The MC uses Soft Keys with integrated LCDs to display switch functions and icons.
The Soft Keys can be programmed to send complex macros and simple keystroke com-
mands and are named so their function is obvious. Any function can be assigned to each
Soft Key to suit the user’s working style.
The Soft Key mappings are saved to
Application Sets
, which automatically change as
each application is activated. Euphonix supplies default Application Sets for a number
of programs but these can be modified and saved. Soft Keys can be
locked
to a specific
application, which maintains control even when it is not the workstation’s current ap-
plication (the term
in focus
is used for the current or front application). The Soft Key
displays can show any character set.
1.1.3
Level 3: HUI
The MC supports the HUI (Human User Interface) command protocol developed by
Mackie to control Digidesign’s Pro Tools. HUI mappings are saved with Application
Sets for instant recall when each application becomes active.
Summary of Contents for MC Media Application Controller
Page 28: ...Euphonix Media Application Controller Operation Manual Installation and Configuration 28...
Page 34: ...Euphonix Media Application Controller Operation Manual Main Touchscreens 34...
Page 54: ...Euphonix Media Application Controller Operation Manual Soft Keys 54...
Page 82: ...Euphonix Media Application Controller Operation Manual Studio Monitor Express Windows 82...
