Euphonix MC Media Application Controller Operation Manual Download Page 19

Page: 19 / 120

Euphonix Media Application Controller Operation Manual

Installation and Configuration

The MC presents a list of three options to install:

•

MCApp, EuCon runtime

, etc. - This is the main MC software application.

It is grayed out since it must be installed for the MC to function properly.

•

MC PC104 Driver, hardware support, firmware

- This installs the actual

hardware driver the EuConMC uses to control the MC surface.

DO NOT

UNCHECK THIS OR YOUR MC WILL NOT FUNCTION

•

CM408T So Update Server

- This installs the Firmware Updates

server, which updates the CM408T module firmware. See 2.2.4

Firmware

Update Server (System 5-MC only)

Press

Next

on the remaining dialogs in the Install Wizard.

Reboot the MC when the Wizard finishes.

2.2.4

Firmware Update Server (System 5-MC only)

CM408T So Update Server

is checked, the Firmware Update Server

launches after the EuConMC installation completes. The CM408T modules will then
prompt to be updated. If they do not, reboot them and they will connect to the Firmware
Update Server. Press the

key on each CM408T after the update prompt appears. Each

CM408T will apply the update, automatically reboot, and be ready to operate. After all
CM408T modules are updated, quit the Update Server.

Summary of Contents for MC Media Application Controller

























































































































Search results

Summary of Contents for MC Media Application Controller

Reviews:

Related manuals for MC Media Application Controller

Brands by name

Popular brands

Euphonix MC Media Application Controller, Operation Manual

Search results

Summary of Contents for MC Media Application Controller

Reviews:

Related manuals for MC Media Application Controller

Brands by name

Popular brands