Control and Customize the Display
19
Control and Customize the Display
Effects
Effect
Flicker
Rate
200
Min
0%
Max Int
100%
DMX
UI Lock
Lock the Display
Set this switch to lock the UI and prevent
any changes to the fixture setup. The
display indicates when the UI is locked.
Adjust the Display Settings
1. Press the Menu button (
), turn
the Intensity encoder to navigate to
Local Settings, and then press the
Intensity encoder to select it.
2. In the Local Settings screen, turn
the Intensity encoder to select the
display parameter that you want to modify, and then press the Intensity encoder to
modify it.
3. Turn the Intensity encoder to modify the value of the parameter, and then press the
Intensity encoder to save the value.
4. Press the Menu button (
) or press the red encoder until you return to the Main Menu
screen when you are done.
Parameter
Description
Backlight
Set the brightness of the display backlight from 10–100%.
Timeout
Set the time that the display will remain illuminated after the last time you press an
encoder or button. Options are:
•
Never (display is always illuminated)
•
30 seconds
•
1 minute (default)
•
5 minutes
•
15 minutes
