14
fos/4 Fresnel User Manual
Studio Mode
1. Press the Function button (
) until the display shows the Studio screen.
Studio
3200K 4500K 5600K
CCT
3200 K
Tint
0.0 Green
Tune
Brightest
Int
100%
Studio
3200K 4500K 5600K
CCT
3125 K
Tint
0.0 Green
Tune
Brightest
Int
100%
Press an encoder to play that
studio preset...
...or turn an encoder to modify the
value in the matching field.
Turn to adjust intensity, or press to
toggle between current intensity and 0.
DMX
DMX
2. Press the color encoder that matches the studio preset you want to use (Blue = 3200 K,
Green= 4500 K, Red= 5600 K).
More Options
•
Turn off the preset: Press the Intensity encoder to toggle the intensity value from the
current value to 0. Press the Intensity encoder again to toggle back to the previous
intensity value.
•
Modify the preset: Turn the encoders to change the corresponding values. For example,
turn the Intensity encoder to change the intensity value, or turn the blue encoder to
change the color temperature value.
•
Revert to the original preset: Press the encoder that corresponds to the preset again to
restore the original values.
•
Save the modified preset: Press and hold the encoder that corresponds to the preset that
you want to re-record. The display shows a three-second countdown before re-recording
the preset.
Note:
The CCT, Tint, and Tune values match the values that are available when the
DMX mode is set to Studio. See
DMX Control Channels on page 10
.
