Put the appliance into operation by turning the speed dial to one of the speed levels
appropriate for preparing your ingredients. After finishing processing, turn off the meat
mincer by turning the dial to position
0/OFF
.
Recommendation
–
The processing takes several minutes and depends on the amount, type and quality
of the meat used.
–
You can also fill the tubes with an appropriate mix (e.g.
meat, vegetable
, etc.).
–
If the output opening of the cone
D9
becomes clogged, it is necessary to turn off the
drive unit, disassemble the cone and clean it out.
i
IV. TABLE FOR THE USAGE OF THE APPLIANCE AND ACCESSORIES
Please consider the following cooking tips as examples and as inspiration. Their purpose is
not to be a complete guide, but to demonstrate the possibilities of various food preparation
methods. Chose the amount of ingredients to be processed so that the maximum content
of the containers marked by a line is not exceeded. A larger amount of processed
ingredients must be divided into several batches and the contents of the container should
be regularly inspected. We recommend that you interrupt your work from time to time and
remove any food which has become stuck or clogged the attachment or is on the walls of
the containers, blender and lid.
Accessories
Food
Max.amount
Time (min)
Speed
Preparation
(mm)
Meat mincer
Beef
5 000 g
10
6
30 x 30 x 30
Pork
5
000 g
10
v
. MAINTENANCE (fig. 9)
Pull out the power plug from the power socket before handling the device in any
way! Do not use abrasive and aggressive cleaning agents!
Meat mincer and including all accessories immediately after use in hot water with
detergent. The plastic parts can be washed in a dishwasher. However, the metal parts
must not be washed in a dishwasher because the detergents may cause them to turn dark
or to rust. Take care that the binding surfaces and the sealing elements are functional.
When cleaning the cutting blade
D2
, work very carefully! Ensure that the cutting blades do
not come into contact with hard objects, which blunt them and reduce the effectiveness.
After cleaning and drying the parts we recommend that you apply cooking oil to the blades
and the interchangeable plates. For easier cleaning of the meat mincer, fi nish off by
grinding some hard pastry (e.g.
a bread roll, bun
).
The tamper
D10
is hollow; it can be
used to store parts of accessories
D6, D7, D8, D9
pic. 8.
Some foods may stain the accessories in a certain way. This however has no effect on
the operation of the appliance and is not cause for a claim or complaint regarding the
appliance! After some time this staining usually goes away by itself.
Never dry plastic moulded parts above a heat source (e.g.
fire stove, electric/gas stove
).
Store the appliance thoroughly cleaned in a dry, dust-free location that is out of reach of
children and incapacitated persons.
GB
21 / 34