–
Do not exceed the maximum continuous operating time of the appliance, see table!
–
Due to safety it is not possible to change the attachments while the drive unit is in operation.
–
If the funnel is empty, do not leave the extra attachment running.
–
Never use the extra attachment if it is not working properly, if it fell to the ground and got
damaged. In such cases take the extra attachment to a specialized service to check its
safety and proper function.
–
When assembling the extra attachment, follow the instructions for use carefully. In order
to ensure proper functioning, any other way of assembling the extra attachment is not
permissible!
–
Long hair, loose clothes or accessories and jewellery can get caught by the rotating parts
of the extra attachment.
Make sure that your hair, clothes and accessories do not get
into dangerous vicinity to the rotating parts!
–
Before removing the extra attachment from the drive unit, allow the rotating parts to stop
completely.
–
If the processed foods start to stick to the accessories (e.g.
on the blades
), turn off the
appliance and carefully clean the accessories (e.g.
with a spatula
).
–
Only use the appliance with original accessories from the manufacturer.
–
Use this appliance only for the purpose for which it was designed as specifi ed in this
user‘s manual. Never use the appliance for any other purpose.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
–
The manufacturer takes no responsibility for damages and injuries caused by the incorrect
use of supplementary machines and accessories (e.g.
ruining of foods, injury, cuts
)
and takes no responsibility arising from the warranty on the appliance in the case that the
above safety notices were not followed.
Attention
Read and follow the safety instructions in the manual to the food processor
or the meat mincer.
!
II. desCRIPTIoN oF THe APPlIANCe ANd ACCessoRIes
D
–
Meat mincer
(pic 1)
D0 – Mincer body
D1 – Spiral feeder
D8 – Mould
D2 – Cutting blade
D9 – Cone
D3 – Interchangeable plate for fine mincing
D10 – Pusher
D4 – Interchangeable plate for coarse mincing D11 – Filling funnel
D5 – Nut
D12 – Cog wheel
D6 – Separator
D13 – Sealing
D7 – Tube for making sausages
D14 – Pusher plate
III. PRePARATIoN ANd use
Remove all packaging materials, take out the food processor and all accessories. Remove
all adhesive foils, stickers or paper from the food processor and accessories.
18
GB
/ 34