17
Using the control card display and dashboard.
The Drive 1000 is equipped with a LCD display and interactive keys for simplified programming and diagnostics. All setup, of the various features,
requires that the control card dashboard be used. Below are the functions of each key on the dashboard.
ACT
RF
Navigate backward in menus, decrease
values, indicate lefthand closing gate
in runtime setup function or enter
diagnostics menu while in standby.
Exit menu levels without saving.
Radio activity indicator.
Processor activity indicator.
Navigate forward in menus, increase
values, indicate righthand closing gate
in runtime setup function or enter
diagnostics menu while in standby.
Test BT mode when in standby or exit
all the way back to standby without
saving when in programming.
Enter programming, advance to next
level of option on display, save value
on display.
Control card programming and setup.
1. Runtime setup. - Page 18.
2. Collision force sensing. Safety level setup. - Page 19.
3. Safety beam setup. - Page 19.
4. BT triggers operating mode selection and setup. - Page 20.
5. Pedestrian operation setup. - Page 21.
6. Receiver setup.
a. Learn remotes. - Pages 22, 23 and 24.
b. Erase remotes. - Pages 25 and 26.
c. Diagnose remotes. - Page 27.
d. Receiver information. - Page 28.
7.
Advanced menu. - Pages 29 and 30.
a. Crawl distance.
b. Quick stop distance.
c. Gate speed.
d. Positive close mode.
e. Auxiliary relay setup.
f. Blue BUS setup.
g. Power settings.
h. Controller setup.
i. Controller information.
j. IEC Standards mode. Enable/disable. (Safety beams must be installed and configured before you can enable this mode)
k. Reset and restore.
Programming menu quick reference guide:
