26
Receiver Setup
Receiver programming and setup.
Master erasing all users from the memory.
From Standby status
- “Selected” mode -
- Standby
The gate can be in any position when performing this routine.
Action
Response
Description
Display
Buzzer
Gate
To enter the program
menu. Press and hold the
button until buzzer
beeps.
Display and buzzer
confirms.
Programming menu
<or> for options
Scroll < or > to select the
receiver setup option.
Display scrolls
through options.
Receiver Setup
<
= change >
With “Receiver Setup”
on the display, press and
release
.
Display shows current
option status.
Receiver Setup
Quick learn
Scroll < or > to select the
Erase remotes option.
Display scrolls
through options.
Receiver Setup
Erase remotes
With “Erase remotes”
on the display, press and
release
.
Display shows first
erase option.
Erase Remotes
Select Address
Scroll < or > to select the
Erase ALL memory option.
Display scrolls
through options.
Erase Remotes
Erase ALL memory
With “Erase ALL memory”
on the display, press and
release
.
Display then prompts
you to press and hold
the
button.
Hold
to
erase ALL
When prompted, press and
hold
.
Display prompts you
to now also begin
holding the > button.
Hold
and > to
erase ALL
While holding
begin
holding the > button.
Display confirms the
erase ALL is about
to begin. Buzzer
beeps intermittently.
Releasing either
button at this stage
will abort the master
erase.
Continue holding
and >
---------------------------
Preparing to
erase ALL
When buzzer silences.
Release the buttons.
Master erase begins.
Display confirms.
Erasing ALL
Please wait...
After erase ALL is complete.
Display confirms.
Erase ALL
Erase complete
After the display confirms
the erase ALL is complete.
Erase ALL
Erase complete
Display reverts to
main erase remotes
options.
Erase Remotes
Erase ALL memory
x2
x1
Scroll left or right to next
program option.
OR
“Selected” mode
- Standby
EXIT back to standby
status
On/off...
