2
Introduction.
Page 3
Be Safe! Instructions, warnings and obligations.
Page 4
Technical specifications.
Page 5
Component identification and descriptions.
Site preparation.
Page 6
Gate mechanics.
Page 7
Duty cycle.
Page 7
Motor positioning.
Page 8
Cabling requirements.
Hardware installation - Mechanical.
Page 9
Baseplate kit and installing the baseplate.
Page 10
Cable conduit height above baseplate.
Page 10
Mounting the motor onto the baseplate.
Page 11
Decanting the oil into the gearbox.
Page 11
How to use the manual override.
Page 12
Installing the rack.
Hardware installation - Electrical.
Page 14
Terminating the AC supply.
Page 15
Wiring and termination of the control card.
Page 16
Installing the limit actuator.
Control card programming and setup.
Page 17
Programming menu quick reference guide.
Page 18
Setting up the gate runtime.
Page 19
Selecting a safety level.
Page 19
Safety infra-red beams setup.
Page 20
Selecting a BT operating mode and adjusting the BT auto-close time.
Page 21
Setting up the pedestrian open distance and pedestrian auto-close time.
Page 22
Receiver programming and setup.
Page 29
Advance programming options and their definitions.
Operating mode definitions and examples.
Page 31
Collision sensing and safety overload routines
Page 32
Safety infra-red beams function. All modes except P.I.R.A.C. auto-close mode.
Page 33
“BT” Button triggers - Standard mode.
Page 34
“BT” Button triggers - Simple auto-close mode.
Page 35
“BT” Button triggers - Condominium auto-close mode.
Page 36
“BT” Button triggers - P.I.R.A.C. auto-close mode.
Page 37
“PED” Pedestrian trigger. With no safety beams installed.
Page 38
“PED” Pedestrian trigger. With safety beams installed.
Page 39
“Loop” trigger.
Page 40
Auxiliary relay modes - Strike lock mode.
Page 41
Auxiliary relay modes - Magnetic lock mode.
Page 42
Auxiliary relay modes - Courtesy light mode.
Page 43
Auxiliary relay modes - Receiver relay mode.
Page 44
Positive close mode.
Page 45
Holiday lock-out mode.
Page 46
Auto-close override/party mode.
Page 47
Tamper alarms.
Troubleshooting.
Page 48
Status LED, buzzer and diagnostics menu definitions.
Page 50
Troubleshooting guide and display definitions.
Page 53 Warranty.
For any assistance with this product that is not covered in this manual please contact us on: 0860 109 238 (RSA) or via our online
support facility at www.et.co.za.
