10
Programming
You have to enter appropriate values for each condition.
In practice, we recommend the following procedure:
STOP:
Here low values should be entered, for example:
Fan
59
Temperature
165
Filter
0
Steam boost
Not set
SD conditions («Stop to Drive»), DS («Drive to Stop»):
You can start with the following values:
Fan
42
Temperature
235
Filter
0
Steam boost
Not set
States «Coast» and «DCX»
Fan
42
Temperature
155
Filter
0
Steam boost
Not set
The actual speed steps in all ESU projects with Dx referred to.
Some sound projects include D1 to D4, other go to D8. These are
the normal bursts of steam. Here you should experiment with the
following values:
Fan
212
Temperature
220
Filter
0
Steam boost
law
For the acceleration levels A (mostly from A1 to A4, sometimes
also to A8), you should higher calorific values and fan speeds pre-
tend, for example,
Fan
245
Temperature
235
Filter
0
Steam boost
law
You can select multiple states simultaneously by holding down the
«Shift» key (hold and then sequentially checking the boxes.)
All D-steps marked
Figure 13:
