6
The green wire connects to any AUX connection (AUX 2 to 10).
This output provides for a synchronous burst of steam with the
sound. In the Example AUX2 is used.
The LokSound decoder must then as described in section 6.1. be
programmed.
Connecting decoder
Connecting LokSound XL V4.0 Decoder
Figure 6:
5.4. Connecting to other decoders (SUSI)
Of course, the ESU smoke generator can be used with decoders
from other manufacturers.
Here are two common types of this is shown as an example.
5.4.1. ZIMO MX695 / MX696
The SUSI connector of the module as a usual coder is connected
directly to the disassembly. As for the connected coder use assem-
bly shown with the parts provided.
For this initial work, the CVs have to be set correctly. In particular, a
function output must be (here: FA2) defined as «heat level».
Programming example for steam generator FA2:
steam
diesel
CV 128
72
80
You can search for various properties for programming the deco-
ders smoke generator by SUSI CVs.
Section 6.2. provides information.
5.4.2. Massoth eMotion XLS
The SUSI connector of the smoke generator is as usual directly
connected to the decoder. To be the trigger for the steam they
utilize the output A3 / F3.
Connecting ZIMO MX695
Figure 5:
