3
Important instructions
All mentioned trademarks or trademarks shown are registered
trademarks or trademarks of their respective owners.
3. Important - Please read first!
Congratulations on your purchase of the ESU smoke generator.
This guide will help you to connect your ESU decoder with a step
by step module. Please read this manual carefully before installati-
on in order to avoid defects!
The smoke generator is designed exclusively for use with electrical-
•
model train layouts provided. It may only operate the components
described in these instructions.
The smoke generator in operation is very hot (above 100°C). Avo-
•
id touching the unit and select an installation location so that the-
re may be no damage due to the excessive temperature.
Do not turn the smoke generator on when it is filled to the top.
•
Leaks of oil and steam can cause burns.
All connections must only be made when the unit is not in ope-
•
ration.
Adhere to the principles as outlined in this manual.
•
Protect from moisture and humidity.
•
No cable must ever touch the metal parts of the locomotive.
•
When assembling the locomotive be sure that no cable be squee-
•
zed or short circuits may occur.
4. General characteristics
The two ESU smoke generators provide realistic smoke and steam
cloud to your models. An integrated control operates both the
fan motor and the heating of the smoke generator. A sensor
maintains the desired heating temperature independent of rail
voltage and constant degree of filling and prevents blowing with
an empty tank.
The smoke generator can be used with both steam and diesel mo-
dels. The smoke generators are designed for optimal use with our
LokSound XL V4.0 decoder. Attached to a decoder the desired the
amount of smoke is precisely adapted to sound sequencing. When
connected to an ESU decoders no adjustments or programming
has to made to the smoke generator.
If using another decoder the smoke generator can be connected
on the Susi interface. In this mode, however, fewer options are
available. SUSI CV programming must also be done in this
case.
5. Scope of delivery
This allows you to find the best option for your model smoke ge-
nerator, two versions are available.
4.1. 54678 track «0»
The «little» smoke generator with its dimensions of 40 x 25 x
29mm for small lane 1 and lane 0 locomotives. In this case the
electronics are separate from the mechanism with a wire harness
attached. The following items are included:
Smoke generator with attached, private electronic board
•
Wiring harness
•
PVC hose with 7mm diameter
•
