Essilor MYOPIA EXPERT 700, User Manual

Page: 87 / 132

85

Mesopic

Scotopic
The active buttons are those for which at least one acquisition is available.
14.6.3 Dynamic
By tapping on the
“Dynamic”
button to display the dynamic pupillometry in the left column, the following
information will also be displayed:

Average: Value of the maximum and minimum pupil diameter measured in all the images acquired
during the sequence.

Pupil Center: Cartesian coordinates of the average pupil center and its standard deviation.

Diameter: Pupil diameter for the frame selected.

Pupil Center (frame): Cartesian coordinates of the center of the pupil for the frame selected.
14.6.4 Photopic, Mesopic, Scotopic
By tapping on the
“Photopic”
,
“Mesopic”, “Scotopic”
buttons, static pupillometry acquisitions will be
displayed with the following information:

Value of the average pupil diameter measured for all the images acquired during the sequence.
The other information is the same as that already described for dynamic pupillometry.
14.6.5 Functions
Graphs
Press the
“Graphs”
button to display the graphs relating to the pupil. This function is explained in the
next paragraph.
Delete
Pressing the
“Delete”
button, the system deletes the current pupillometry frame and the data it contains.
14.6.6 Graphs
In this section, three types of graphs are displayed:

Decentration (Fig.52)

Latency (Fig.53)

Statistics (Fig.54)
In all these graphs, you can select the eye you wish to analyze by tapping on
“OD”
or
“OS”
.
The
“Close”
button closes the graphs.