manualshive.com logo in svg

ESPEC Platinous ESL Series, User Manual

The ESPEC Platinous ESL Series is a top-of-the-line environmental test chamber designed for precision testing. Ensure proper operation and maximize performance by downloading the user manual for free from manualshive.com. This comprehensive manual provides all the information you need to utilize the full capabilities of your device.

Share
Download
background image

    Platinous User’s Manual                                                                               

63

Operation

4. Input the target temperature (humidity). Pressing the FIELD BOX next to Temp. SP (hum. SP) lays a 

keyboard over the screen to enable input. Make your input from there. Note that if humidity control is 
OFF, humidity cannot be input.

5. Turn humidity control ON/OFF as needed. Press the ON box next to Hum. Control to make the setting.

When dot is yellow:     Humidity control is ON.
When dot is black:      Humidity control is OFF.

6. When finished setting temperature (humidity), press the MAIN MENU button.

Summary of Contents for Platinous ESL Series






























































































































Reviews:

No comments

Related manuals for Platinous ESL Series

Brands by name

Popular brands

Load more brands