20
490725-05
Maintenance
SES 2010
09:00
Maintenance
Bacterial Filter
High Security
Door Seal
Resetting the Door Seal Counter
The autoclave counts the number of cycles
performed by the Door Seal. From this, it
determines when the item will require renewing.
The autoclave uses a simple traffic light system
to indicate the usage of the parts:
Possible effects to cycle quality -
replacement overdue.
Immediate replacement required.
Cycle count not high enough to require
replacement, although if the part is
damaged, replace immediately.
The
Replace the Door Seal
Service screen
begins to display when an amber warning is in
force.
Use the up/down buttons to highlight
your chosen setting in the blue area of
the screen.
Press to reset the highlighted setting
Press
OK
to accept
.
Press to return
without change.
Replace the filter and/or
seal before resetting the
counter(s).
When you reset an
item on this screen,
the item is marked
with an arrow to
indicate that you have
selected to reset this
item.
Item(s) are reset when
you press
OK.
About SES 2010
SES 2010
09:00
About SES 2010
Serial Number
Software Version
Advisory Code
Telephone Service
Contact Eschmann
Autoclave Type
Fresh Water Quality
About SES 2010
Contains useful information about your
autoclave for when contacting Eschmann.
Press to return to your starting screen.
Press to view the Records menu.
Configure cycles
Configure Cycles
This page is used to select cycles for display
on the Cycle Selection screen. Currently the
SES2010 has a 134°C N type cycle only
.
Toggle checkbox.
Press
OK
to accept
.
Configure Cycles
SES 2010
09:00
Display on Cycle Selection
134
˚
N
Set as default
121
˚
N
121
˚
N
n/a
n/a
SES 3000B
09:00
Perform a Safety Valve Test?