10
490725-05
1
Cycle complete
SES 2010
09:00
Cycle Type
Cycle #
CYCLE
COMPLETE
Use Load
Immediately
You will be prompted
to enter a PIN code.
Refer to Section 3.2.
Press to view the
completed cycle log
2
Open the door
SES 2010
09:00
3
Unloading
Use the tray lifter - refer to Appendix 2.
THE UNIT IS NOW READY
TO RUN ANOTHER CYCLE.
Leave the door ajar between cycles.
Take care!
The load, chamber and
door will be VERY HOT.
Sterilised items are
intended for immediate
use.
7 Cycle completion and unloading
If an action is
required, for example,
the Fill Water
Reservoir screen is
displayed, you can
still open the door.
Press to unlock
door when
OK button
displayed.
WITHOUT DRYING
WITH DRYING
1
Sterilisation complete
SES 2010
09:00
Cycle Type
Cycle No
Temp °C
Pressure kPa
2
Positioning door for drying
Take care!
The load, chamber and
door will be VERY HOT.
3
Drying phase
1. Turn door handle anti-clockwise and release
door catch. See Fig 1, page 4.
2. Open the door briefly to allow residual
moisture to escape.
3. Push the door closed again so that it clicks
onto the catch, slightly ajar.
SES 2010
09:00
Cycle Type
Cycle No
Temp °C
Pressure kPa
17m
Drying will run for
17 minutes.
Green tick
indicates cycle
passed.
Green tick
indicates cycle
passed.
Press OK to
unlock door,
Press to end
drying early.
1. Turn door
handle anti-
clockwise
and release
door catch
See Fig 1, pg 4.
2. Open the door.
Door on catch, slightly ajar.
when OK displayed.
You will be prompted
to enter a PIN code.
Refer to Section 3.2.