490725-05
13
10.1 Replace the door seal
SES 2010
09:00
CRITICAL
ERROR
Replace
Bacterial
Filter
Replace
Door
Seal
The door seal needs replacing when this screen is
displayed.
You can replace the door seal with the autoclave
switched on.
Press OK to temporarily clear the screen.
WARNING!
The water, chamber and load could be very
hot and potentially non-sterile.
1. The door seal should be replaced by a qualified
Eschmann Engineer. Alternatively a user may
replace the door seal through use of the Door Seal
Kit, available from Eschmann. The kit comprises
comprehensive instructions and all required parts
to ensure safe and correct replacement. Part No.
MUW216747.
2. Follow local biohazard procedures for cleaning and
decontamination when disposing of the door seal.
3. Update the Settings Menu counter for the door seal.
Updating the Settings Menu
It is important to update the door seal counter in the
Maintenance Menu. The counter counts the number
of cycles performed using the seal. This allows the
autoclave to warn you when replacement is required.
Press to display the Settings Menu from the
Open Door, Close Door, or Cycle Start screen
and select Maintenance.
Refer to Section 12.2 : ‘Settings Menu’ - (Managers
only).
10 Service screens
10.2 Service required
The autoclave requires servicing by a qualified
Eschmann, or Eschmann trained engineer. Contact
Eschmann as soon as possible.
Press to display the details required for
contacting Eschmann.
Press to acknowledge the warning and clear
the screen. The screen will reappear at the
beginning of each cycle until the autoclave is
serviced.
SES 2010
09:00
CRITICAL
ERROR
Replace
Bacterial
Filter
Service
Required