Esaote MyLabOmega, Getting Started

Page: 91 / 118

C U S T O M I Z I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 6 - 15
GETTI
NG STARTED
WARNING
The displayed Sweep Velocity is correct as long as you do not use a
secondary monitor and/or an incorrectly calibrated monitor.
FOOTSWITCH Folder
This option is used to set which function is associated to each pedal (left, middle
and right) of the footswitch.
Select from the curtain menu the function then press
SA VE
.
PROBE BUTTONS Folder
This option is used to set which function is associated to each probe button.
Select from the curtain menu the function then press
SA VE
.
RAW DATA Folder
When the associated license is enabled and the option selected, data are saved in
raw format for Post Processing elaboration.
Refer to the “Archive” section of this manual for further information on this
feature.
KEYBOARD BUTTONS Folder
This option is used to set which function is associated to
AC Q UIRE
button and to
each of the four configurable buttons (
1
,
2
,
3
, and
4
).
From the curtain menu select the function you desire then press
SAV E
.
AUTO BUTTON SETUP
Sets the action after
AUTO
pressure: AUTOADJUST (to
automatically adjust the B-Mode image), ECFM (to
automatically optimize CFM image) or BOTH of them.
EASYTRACE ENABLED
When checked, this option allows to enable easyTrace.
IMAGE AUTOFITTING When checked, for linear probes and superficial depths, it
adapts the size to the width of the screen.
ENABLE SMARTOUCH
When checked, it enables the smarTouch for the selected
application.
INVERT CFM SCALE
WITH STEERING
When checked, this option allows to automatically invert
the Doppler scale when inverting the steering with reference
to the vertical line.
Fields Action