S Y S T E M O V E R V I E W
MyLab
- G E T T I N G S T A R T E D
3 - 7
GETTI
NG STARTED
Table 3-4: Connectors on rear side
Mains Socket
The mains socket is located on the rear side of the system. Connect the AC/
DC adapter to the mains socket.
If the system is equipped with the AC/DC adapter, Esaote P/N 151004300
(see label on the AC/DC adapter):
WARNING
Use only the AC/DC adapter provided by Esaote with the
MyLab
.
If the system is equipped with the AC/DC adapter, Esaote P/N 151004301
(see label on the AC/DC adapter):
WARNING
Use only the XP Power AC/DC adapter, type AHM180PS19-XE1057,
provided by Esaote with the
MyLab
.
When installing
MyLab
, check that the power cable is not tightly bent, that
it can’t be squashed by a misplaced foot or by heavy objects.
HDMI Type Output
MyLab
can be connected to an auxiliary monitor. Any auxiliary monitor
connected to this port has not to be used for diagnostic purposes.
NOTE
The resolution of the auxiliary monitor cannot be lower than the main
display. The system automatically shuts down whenever a lower resolution
is detected.
Connect the monitor's cable to the connector of the rear panel.
Connector Symbol
Description
HDMI connector
28-Pin Connector (not currently used)
Main Socket
Summary of Contents for MyLabOmega
