Esaote MyLabOmega, Getting Started

Page: 80 / 118

C U S T O M I Z I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 6 - 4
Generic Configuration Procedure
Once accessed the configuration screen for the parameter you want to set, a
common set of commands is available and a common setting procedure can
be used.
In a few limited cases the procedure may differ to the one described below,
in these cases it will be described in the specific paragraph.
Procedure

Press
M EN U
, and select the parameter you want configure.
The configuration screen for the selected parameter is
displayed.

On the left of the screen is displayed the list of possible
items.

Select the desired item, then choose one of the following
options.
Table 6-1: Configuration Menu Options

Once in editing mode you can change the name of the
selected item (
NAME
field), enter a description (
NOTES
field),
confirm and save the settings (
SAVE
), or exit the menu
without saving the settings (
CANCEL
).
At any time you can go back to the main menu (
BA CK T O ME NU
) or exit
from the menu and go back to Real Time (
CLOSE
).
Option Description
E DIT
To modify the settings of the item selected
on the top-left list.
Alternatively double click on the item you
want to modify
CLONE
To create a new customized item starting
from a copy of the existing selected one.
NEW
It replaces
CLONE
when no customized
items are present.
REMO VE
To delete the selected customized item. A
confirmation dialog will be displayed. Only
customized items can be deleted.
FACTORY
To retrieve all factory values and to delete
all customized items.