ESPAÑOL
ENGLISH
DEUTSCH
FRANCAISE
PORTUGUESE
POLSKI
РУССКИЙ
26
ENGLISH
3050mAh). This provides a limited period of time for copying transponders in
places where the machine cannot be plugged in to a mains electricity supply.
The remaining charge in the battery is always visible on the device via an
LED indicator (which turns red when a recharge is necessary) to inform
users of a low battery charge level.
For recharging the battery, TRC20 comes with a 220AC / (5V/2.4A) power
adapter. (Power connection jack indicated by the number 1 in the image
below).
When leaving the machine in a fixed location, we recommend also leaving it
plugged in to a mains power supply.
As stated at the beginning of this section, TRC20 is also capable of
pre-programming vehicle remote controls that must be subsequently
programmed inside the vehicle to become operational.
TRC20 works with three basic types of blank remote controls:
• KRC100 (TP from Errebi (IMMO) and remote control, separate). RKE keys.
• KRC200 (TP (IMMO) and remote control, on the same chip). RKE Keys.
• KRC300 (TP (IMMO) and remote control, on the same chip). SMART Keys.
These can be used for all the models currently available and any others that
may be brought to market in the future.
The method for pre-programming these keys will depend on the type of
Errebi remote control being used and the technology installed in the vehicle.
• For the KRC100 remote controls, a special cable is used for connection
to the PS2 port (indicated with the number 2 in the image above). This only
records the part of the remote control from the vehicle.
• For the KRC200 / KRC300 remote controls, the same antenna is used as
the one used for the R/W of the transponders, and the generated RFid field
is used to record both the immobiliser part and the remote control part.
Once pre-programmed, they just need to be registered. This can be done
either via a sequence of actions (On-Board Programming-OBP controls) or
via an OBD-II scanner.
The last feature on the device in terms of functionality is the button on the
rear of the TRC20 (indicated with the number 4 in the image above), which
does one of two things depending on how long it is pressed:
• 1 short press: Resets any Wi-Fi configuration settings and returns the Wi-Fi
configuration to the default settings (AP Mode).
Resets the TRC20.
• 1 long 5-second press (do not release early): Resets the TRC20.
Updates are free, with only an Internet connection and prior registration of
the TRC20 machine required.
2.1 MACHINE ACCESSORIES
When unpacking your TRC20, you should find the following items inside the
box:
1. INTRODUCTION AND GENERAL OVERVIEW
1.1 OVERVIEW
To conclude our evolution of the TRS family, we are launching the TRC20.
We have developed a more compact and technologically advanced machine
based on the already famous and successful LS8 platform. Besides cloning
transponders, this new machine is also capable of generating remote
controls and programming them via OBD-II using any of the scanners that
can be found in the market.
By applying our philosophy aimed at ensuring total ease-of-use, the TRC20
has only 1 ON/OFF button that turns the machine on or off based on how
long it is pressed:
· On: 1 short press.
· Off: 1 long press (4 seconds).
TRC20 requires an Internet connection because the decryption algorithms
for the various types of technology that exist in the market (Megamos
Crypto/Philips Crypto/Texas Crypto, etc.) run on the calculation servers
installed at Errebi.
If you encounter any difficulty using or starting up your device, please
contact the Technical or Customer Services Department of the Altuna Errebi
Group.
1.2 TRANSPORT AND PACKAGING
The machine comes secured by a Velcro strip inside a cardboard box with
the following characteristics:
• Width = 147.72 mm
• Length = 176.64 mm
• Height = 78 mm
• Weight = 550 g
When unpacking your machine for the first time, carefully inspect it for any
possible damage that may have occurred in transit.
If you find anything out of the ordinary, do not use the machine and contact
the Technical or Customer Services Department of the Altuna Errebi Group.
2. TECHNICAL CHARACTERISTICS
TRC20 not only offers the same comprehensive range of cloning options for
all the leading transponder manufacturers as the LS8 but also includes the
option to prepare remote controls for opening the vehicle.
All the features of this device are available immediately because its software
has not been fragmented to thus enable additional charges for certain
specific features.
Unlike the LS8, which could calculate some of the technologies present in
the market (Philips Crypto HT2 / Texas Crypto DST40) with no connection
whatsoever, TRC20 requires uninterrupted Internet access because users
need to log in to verify the TRC20 database and to check that access is
available to the calculation servers located at Errebi.
TRC20 has been fitted with all the necessary connectivity features to make
Internet access as easy as possible. This connection can be established via:
• A wired LAN network (Ethernet port RJ-45, indicated by the number 3 in
the image below).
• A wireless Wi-Fi network.
In order to improve the operational capabilities of the machine (and not limit
its use to inside your business premises only), TRC20 has been fitted with
a battery similar to those used in mobile telephones (Ion-Lithium / 3.7Vdc-
1
2
3
4
