ero electronic MKC, User Manual, Page: 35 / 141

31
The modify mode is started.
This display allows you to load the default configuration
parameter.
For more details see chapter "Default parameter" (see
Appendix A).
4) By
s
or
t
push-button select the OFF indication and push
the MENU push-button.
The display will show:
This is the starting display of the first group of configuration
parameters.
NOTES :
1) In the following pages we will describe all the parameters of
the instrument but the instrument will show only the
parameters related with the specific hardware and in
accordance with the specific instrument configuration (i.e.
setting OUT 3 different from servo, all the parameters related
with servomotor output will be skipped).
2) During configuration parameters modify mode, the upper
display shows the selected parameter group, the lower
display shows the mnemonic code of the selected parameter
while the central display shows the value or status assigned
to the selected parameter.
3) For an easy consultation of this manual, a table with all the
parameter visualizations is enclosed.
When it is desired to exit from configuration modify mode
proceed as follows:
a) Push "MENU" push-button until the "Configuration group END
is displayed.
b) Pushing ”
s
” or “
t
” push-button select the "YES" indication.
c) Push “MENU” push-button. The instrument terminates the
configuration modify mode, it preforms an automatic reset
and restarts in the run time mode.
Xkc-1-C0.P65 5/29/02, 11:59 AM 31