ERNITEC EDNS V3000 Series, User Manual

Page: 14 / 124

13
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
3. General System Setup
Before operating the DVR, some general configuration should be
setup first. The following subsections will introduce function keys
on the front panel and general configuration of the DVR.
The regular displayed OSD information and its displayed
positions are shown as following figure. Title of the channel will
be displayed on the top-left corner of the window, either in full
screen mode or in multiple channel mode. The current operation
status and date/time information will be displayed in the status
bar at the bottom-left corner of the screen. Move the cursor to
any status icon and its description will be displayed. Refer to the
Setup Guide for a list of status bar icons and their descriptions.
Ch1
2011/03/09 PM 04:31:22
3.1 Front Panel Introduction
The front panel controls enable users to control the unit and
preset the programmable functions.
3.1.1 LED Definition
The LEDs on the front panel of the DVR are described as follow.
REC LED
The LED blinks while the DVR is recording.
Alarm LED
The LED lights up when an alarm is triggered.