ERNITEC EDNS V3000 Series, User Manual

Page: 36 / 124

35
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
3.5.4 Per Camera Configuration
This function is used to set the Day / Night / Weekend PPS
(Picture per Second) and Quality for each channel. The Preset
Configuration must be set to <OFF> for accessing these
schedules. The menu is displayed as below.
Per Camera Config
Cameral Select
Normal PPS
Normal Qlty
Event Max PPS
Event Qlty
Event Active
Day
30
Mid
30
Best
Both
Night
30
Mid
30
Best
Both
CH01
Weeken
d
30
Mid
30
Best
Both

Firstly, select a Camera for setting its record configuration.
The image and recording settings from the selected camera
will be displayed on the screen.

Move the cursor using Direction keys and press ENTER to
select an item.

Change the value using UP / DOWN keys.

Press ENTER to confirm the settings or ESC to abort.

Press ESC to return to Record Setup menu.
Please note that the normal/event PPS for each channel cannot
exceed 30 for NTSC system, or 25 for PAL system.
3.5.5 Record Event Video Only
If the DVR shall start recording only when alarms are triggered,
follow the steps below:

Enter the OSD setup menu with correct password.

In the OSD setup menu, select <Record Setup> menu. Move
the cursor to the item <Preset Config>, and select <Event
only>.
Refer to OSD Setup Manual, section Preset Record
Configuration for more detailed information.