ERNITEC EDNS V3000 Series, User Manual

Page: 53 / 124

52
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
3.6.8.6 Alarm Out
This item allows users to enable/ disable the alarm output on the
selected channel to activate the relay. The signal can be a light
or siren to caution an alarm event. Select <ON> to enable the
alarm output, or <OFF> to disable.
3.7 POS Setup
The <POS> function provides a connection between the DVR
and a Point-of-Sale (POS) device, such as a cash register. With
this function, the financial transaction data can be linked to
specific camera images and recorded to the DVR. To enable this
function, enter OSD setup menu with proper account, and select
<POS>. Press Enter and the following OSD setup menu will
show up.
POS
POS Function
POS Overlay
Exception POS Setup
Input Setup
On
Live & PB
ENTER
ENTER
3.7.1 POS Function
This item is used to enable/ disable this function. Select <On>,
the text database will be created on the hard disk.
3.7.2 POS Overlay
Users can decide when the POS overlay should be displayed on
the monitor. Select <Live> to display the POS overlay in Live
mode; select <PB> to display the POS overlay in Playback mode;
or select <Live & PB> to display in both modes.
NOTE: POS overlay will only be displayed in full-screen
mode.
NOTE: PB overlay is available only under ×1 PB speed.