ERNITEC EDNS V3000 Series, User Manual

Page: 51 / 124

50
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
Detected Area Setup
After selected this item, the detected area is displayed as follows.
The detection area consists of 192 (16×12) detection grids.
Use the Direction keys to move the cursor and press ENTER to
select or de-select a grid. Press MODE to select all of the grids
for detection; press MODE again to de-select all of the grids.
Sensitivity
This item is used to set the sensitivity of detection grids for the
camera. A greater value indicates more sensitive motion
detection. A motion alarm will be triggered once the amount of
motion detected exceeds the Threshold value.
Move the cursor to <Sensitivity> and press ENTER, and then
use UP/ DOWN keys to adjust the value. The value is increased
by 4% increment.
Block Threshold
<Block Threshold> indicates the motion alarm triggered level;
select from <1> to <16>. Selecting <1> means the DVR will
trigger the alarm when one grid is detected; and selecting <16>
means the DVR will trigger the alarm when 16 grids are detected.
Move the cursor to <Block Threshold> and press ENTER, and
then use UP / DOWN keys to adjust the value.
3.6.8.5 Alarm In
This item allows users to enable/ disable alarm input detection.
According to users
’ application, select <N/O> (Normal Open) or
<N/C> (Normal Close) to enable the alarm input detection, or