ERNITEC EDNS V3000 Series, User Manual

Page: 57 / 124

56
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
<Inside The Range>: When the value of a transaction is within a
certain range, it will be marked as an
exception. The range need to be defined
in the following sub-setting <Value> and
<Value (Upper Limit)>.
<Outside the Range>: When the value of a transaction is
beyond a certain range, it will be marked
as an exception. The range need to be
defined in the following sub-setting
<Value> and <Value (Upper Limit)>.
NOTE: Transactions will be marked as exceptions in text
database only when:
(1) “Exception Strings” and “By
Numerals” are set and (2) “Trigger” is <ON>. The data
stored before hand will not be marked as exceptions.
3.7.4 Input Setup
This item is used to configure the connection settings of the POS
device.
Input Setup
Input Source
Camera Selection
Text Filter
Manual Filter Setup
Input Process
Text Baud Rate
Text Bits
Text Stop
Text Parity
Direct Connected
1
ASCII
ENTER
Canonical
9600
8
1
None
Input Source
Select the input source of the POS device, either direct
connected or connected with the Data Converter.
Camera Selection
Select a camera to display the text overlay.