ERNITEC EDNS V3000 Series, User Manual

Page: 89 / 124

88
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
4.5.5 Set Preset Points
The DVR allows users to set preset positions. The amount of
preset points depends on the dome manufacturer.
Follow the steps to set preset points.

Press a Channel key to view the corresponding camera in
full-screen.

Then press DOME to enter Dome Control mode. The dome
control panel will be displayed.

Use Direction keys to pan/tilt the dome camera to desired
position.

Click <Preset> on the dome control panel or press CH1 key
to access the Set/Go Preset function. A numeral keyboard will
be displayed as below.
1 2 3 BS
4 5 6 Set Preset
7 8 9 Go Preset
Exit 0 Clear Run Tour

Input a desired preset number.

Click on the <Set Preset> button to save the position. Now
the preset position is set and ready to be called.
4.5.6 Call Preset Points
Follow the steps to call preset points.

Press a Channel key to view the corresponding camera in
full-screen.

Then press DOME to enter Dome Control mode. The dome
control panel will be displayed.

Click <Preset> on the dome control panel or press CH1 key
to access the Set/Go Preset function. A numeral keyboard will
be displayed.

Input a desired preset number.

Click on the <Go Preset> button to call the preset point. Then