Ericsson MRS3000, Field Service Manual

Page: 95 / 159

Open information
DESCRIPTION
47 (69)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/SMK Magnus Lindahl MRS3000 Programmers reference manual
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
PROG.DOC
ROW 08:
Number of DTMF digits to dial.
Value range: 00-07h
This TAB describes the transmitted tone call and the DTMF digits to dial when function code 5
has been dialled. The transmitted tone call will be a normal call.
Example (default) :
When function code 5 has been dialled, the third and the fourth digits of the tone call shall be
dialled. The route is always 12 and the first, second and fifth digits in the tone call are always 1,
2 and 5 respectively.
Table Row Data Comment
89 01 01 First route digit = 1
89 02 02 Second route digit = 2
89 03 01 First tone call digit = 1
89 04 02 Second tone call digit = 2
89 05 0E Dial third tone call digit
89 06 0E Dial fourth tone call digit
89 07 05 Fifth tone call digit = 5
89 08 02 Two digits to dial
TEL DIGITS 6 (AREA 2 TAB 90)
ROW 01-ROW 02:
Route.
Value
range:
00-09h = Route digits 0 through 9
0Eh = Reference to dialled DTMF digit
0Fh = In both ROW 01 and ROW 02 means auto selection of route.
ROW 03-ROW 07:
Tones to transmit.
Value range:
00-09h = Tones 0 through 9 in choose tone system
0Eh = Reference to dialled DTMF digit
ROW
08:
Number of DTMF digits to dial.
Value range: 00-07h
This TAB describes the transmitted tone call and the DTMF digits to dial when function code 6
has been dialled. The transmitted tone call will be a normal call.
Example (default) :
When function code 6 has been dialled, the five tones in the tone call shall be dialled.
The route is always 12.