Open information
DESCRIPTION
4 (21)
Uppgjord (även faktaansvarig om annan) -
Prepared (also subject responsible if other)
Nr
-
No.
KL/ECS/S/MK Magnus Lindahl
MRS3000 PC programming tool
Dokansv/Godk -
Doc respons/Approved
Kontr
-
Checked
Datum
-
Date
Rev
File
KL/ECS/S/MK
1997-04-06 A
LZB 119 1661
PC.DOC
3.1
THE MAIN MENU
After you answered the file question the Main menu will appear on the screen. The screen will then look
as below.
cu200.mem
1. CU Programming
2. LP Programming
3. Change RX Tone tables
4. Change TX Tone tables
5. Call number tables
6. Upload/Download to CU/LP
7.
Quit
Save Load Save
text
F1 F2 F3
The current entry will be in inverse video.
You will select one option, either by moving up and done with the
UP
and
DOWN
key followed by a
return at the desired entry, or by entering the digit corresponding to the desired entry.
With the function keys you will be able to select the following actions:
F1 Save
If you press the
F1
key the whole configuration will be saved on a file selected by you.
This file is in Motorola format and is possible do load down to a PROM-programmer accepting
the Motorola format.
F2 Load
If you press the
F2
key you will be prompted for a file containing the configuration to load.
F3 Save text
With the F3 key you will be able to save the loaded configuration in a text file.
The text file will be named as the configuration file except that the file extension will be ".prt". The
text file is readable to human beings, and is appropriate to print out on a lineprinter or a similar
device. This file is useful if you would like to have a written documentation of the current
configuration or a working paper.
