OPERATING INSTRUCTIONS
Caution: The Mitre Saw should be inspected
(particularly for the correct functioning of
the safety guards) before each use. Do not
connect the saw to the power supply until a
safety inspection has been carried out.
Ensure that the operator is adequately trained
in the use, adjustment and maintenance of
the machine, before connecting to the power
supply and operating the saw.
WARNING:
To reduce the risk of injury, always
remove the battery from the saw before
changing or adjusting any of the machines
parts. Compare the direction of the rotation
arrow on the guard to the direction arrow on
the blade. The blade teeth should always point
downward at the front of the saw. Check the
tightness of the arbor screw.
1. THE LASER GUIDE
This saw is equipped with a laser cutting
guide which is powered from the battery
pack. This allows the operator to preview the
path of the blade through the workpiece but
should be regarded as a useful guide only.
The slide ON/OFF switch for the Laser Guide
is positioned on the LH side of the operating
handle. (Fig 10)
Avoid direct eye contact, and do not use on
material that could reflect the laser beam.
WARNING:
Do not stare directly at the laser beam. A
hazard may exist if you deliberately stare into
the beam, please observe all safety rules as
follows.
• The laser beam shall not be deliberately
aimed at personnel and shall be prevented
from being directed towards the eyes of a
person.
Fig 10
ERBAUER 24V 165MM SINGLE BEVEL MITRE SAW
