When all adjustments, settings or maintenance
have been completed, make sure that all keys
or wrenches have been removed, and that all
screws, bolts and other fittings are securely
tightened.
While the machine has been factory set, it is
advisable that the 0
O
setting of the rotary table
and the 90
O
perpendicular setting of the tilt
head be checked, as these positions may have
moved in transit.
To confirm the 0
0
rotary table setting:
a) Set the rotary table at 0
0
and tighten the
rotary table lock handle.
b) Use an engineers square (not supplied) to
check that the angle between the machines
fence guide and the blade is 90
0
. (Fig 20)
c) If the angle requires adjustment, loosen
the two fence guide clamp screws and align
the fence guide against the engineers square.
Retighten the clamp screws.
Similarly check that the angle of the saw blade
to the face of the table is 90
0
. (Fig 21)
To adjust:
a) Loosen the locknut
b) Using a suitable hex key screw the 90
0
adjustment screw clockwise or counter
clockwise until correct alignment has been
achieved. (Fig 22)
c) Retighten the locknut.
Fig 20
Fig 21
Fig 22
90
0
ERBAUER 24V 165MM SINGLE BEVEL MITRE SAW
