13. CUTTING BOWED MATERIAL
Before cutting any workpiece, check to see if
it is bowed. If it is bowed the workpiece must
be positioned and cut as shown. See Figs 18
& 19
Do not position the workpiece incorrectly or
cut the workpiece without the support of the
fence.
14. CLEARING JAMMED MATERIAL
1. Turn the mitre saw “OFF” by releasing the
trigger switch.
2. Allow the blade to come to a complete halt.
3. Remove the battery pack from the mitre
saw.
4. Remove any jammed material from the unit.
5. Re-install the battery pack.
15. TRANSPORTING
When transporting the saw between
locations make sure that:
1. The saw head is locked in the down
position.
2. The rotary table mitre handle, the bevel
locking lever and the slide locking knob are all
securely tightened.
3. Use the transportation handle cut-outs on
either side of the machine base to lift the saw.
Do not lift the saw by the switch handle alone.
Note
Although compact this saw is quite heavy,
Enlist competent help, if necessary, when
transporting this saw.
MAINTENANCE & ADJUSTMENTS
PRECISION SETTING OF ANGLES
Warning: Before making any adjustments, or
carrying out maintenance to the saw, make
sure that it is disconnected from the mains
supply.
Fig 18
Fig 19
ERBAUER 24V 165MM SINGLE BEVEL MITRE SAW
