7. Install the new 165 mm (6.5”) blade. Make
sure the rotation arrow on the blade matches the
clockwise rotation arrow on the upper guard. The
blade teeth should always point downward at the
front of the saw. (Fig 5)
8. Re-install the outer blade flange ensuring that
it is seated correctly on the arbor.
9. Refit and hand-tighten the arbor screw.
10. Prevent arbor rotation by using the ‘C’
spanner as in point 5 above
11. Tighten the arbor screw using moderate
force, but do not overtighten.
12. Rotate the cover plate back to its original
position, ensuring that the lower blade guard
completely covers the blade.
13. Ensure that the lower blade guard operating
cog has engaged with the geared quadrant
operating lever. (Fig 6)
14. Replace the cross-headed screw and tighten
to secure the cover plate into its operational
position.
15. Ensure that both blade changing spanners
are removed and safely stored for future use.
16. Check the operation of the guard mechanism.
Warning: Ensure the blade guard is fully functional
before using the machine.
Note: Spacers and spindle rings should not be used
with this machine and/or blade
Fig 5
Fig 6
ERBAUER 24V 165MM SINGLE BEVEL MITRE SAW
