20. The operator is adequately trained in the use, adjustment and operation and
operation of the machine.
21. Provide for adequate room lighting at your workplace or for adequate lighting
of the immediate work area.
22. When fitted with laser no exchange with different type of laser is permitted.
Repairs shall only be carried out by the laser manufacturer or an authorised agent.
23. Refrain from removing any cut-offs or other parts of the workpiece from
the cutting area whilst the machine is running and the saw head is not the rest
position.
24. Never stand on this tool. Serious injuries could occur when this tool tips over
or when coming in contact with the saw blade.
25. Only use the saw with guards in good working order and properly maintained,
and in position.
26. Keep the floor area free of loose material e.g. chips and cut-offs.
27. Ensure the speed marked on the saw blade is at least equal to the speed
marked on the saw.
28. Warning. Not replace the laser with a different type.
Instruction that repairs shall
only be carried out by the laser manufacturer or an authorised agent.
WARNING:
the operation of any mitre saw can result in foreign objects being
thrown into your eyes, which can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles or safety glasses with side shield and a
full face shield when needed.
WARNING
: If any parts are missing, do not operate your mitre saw until the
missing parts are replaced. Failure to follow this rule could result in serious
personal injury.
CARRYING YOUR MITRE SAW
Safety Advice
1. Although compact, this saw is heavy.
To reduce the risk of back injury, get competent
help whenever you have to lift the saw.
2. To reduce the risk of back injury, hold the tool close to your body when lifting.
Bending your knees so you can lift with your legs, not your back. Lift by using the handhold
areas at each side of the bottom of the base.
3. Never carry the mitre saw with the battery pack attached to the machine.
Be careful
to avoid touching the on/off trigger switch in the handle. Carrying the machine by the cutting
handle with the battery back attached risks accidental starting of the machine.
4. Before moving the saw tighten the slide lock knob, mitre handle and bevel lock
knob to guard against sudden movement.
ERBAUER 24V 165MM SINGLE BEVEL MITRE SAW
