QX50/QX200/QX2000; (SW Version 6.0.x)
41
QX50/QX200/QX2000 Manual III: Extension User’s Guide
The table displayed here lists destinations where the incoming call from a particular caller will be ringing in the configured sequence.
The
Enable/Disable
functional buttons are used to enable or
disable ringing on the destinations in the Find Me/Follow Me
table.
The
Ring Extension Phone
drop down list is used to select the
interval in which the current extension (on which you are
currently configuring the Find Me/Follow Me service) will ring
on the incoming call from the selected caller. With the
Immediately
selection, the current extension will ring
immediately as the call comes in.
The
Max Active Calls Count
text field requires the maximum
number of active calls.
If
N= 1
, where
N
is the maximum number of active calls, then only
one active call will be possible to make and the next call will go to
the voice mail. If
N
>1, then the next call will go to the next Find
Me/Follow Me phones (if configured) which are not in the call.
The
Confirmation Passcode
text field requires the password to
accept the call for destinations where passcode activation is
enabled (see below). Only digit values are allowed in this text
field.
Fig.III- 34: Find Me/Follow Me page
Add
opens the
Add Entry
page to add a destination to the Find
Me/Follow Me table. It consists of the following components:
Call Type
lists the available call types:
•
PBX
- destination is a local QX IP PBX extensions or Auto
Attendant.
•
SIP
–destination is reached through a SIP server.
•
PSTN
–destination is a PSTN user.
•
Auto
– used for undefined call types. In this case, routing
pattern will be considered here and passed through Call
Routing Table.
Fig.III- 35: Find Me/Follow Me – Add Entry page
The
Address
text field requires the SIP address (see chapter
Entering SIP Addresses Correctly
), extension or PSTN number, where the incoming call from
the certain caller will be ringing. If the address already exists in the table, selecting
Save
will display the error “Caller address already exists”. A wildcard is
allowed in this field (see chapter
Entering SIP Addresses Correctly
). The extension number should be inserted into the
Address
text field for the PBX call
type. The PSTN number length depends on the area code and phone number.
The
Start Ringing
drop down list is used to select the interval when the destination will ring after the call from the selected caller comes in to the current
extension.
Immediately
selection indicates that the destination will ring immediately as the call comes in.
The
Ask Confirmation Passcode
checkbox is used to enable the password protection of the call. With this option enabled, the destination who answers
the call will be prompted to insert a password in order to accept the call. The confirmation passcode is defined under the Find Me/Follow Me table (see
above).
Welcome Message
- this group allows specifying the Find Me/Follow Me
Welcome Message Delay
and updating the welcome message which is playing
only once when calling to Find Me/Follow Me extension, downloading it to the PC, or restoring the default one.
The group offers the following components:
