QX50/QX200/QX2000; (SW Version 6.0.x)
35
QX50/QX200/QX2000 Manual III: Extension User’s Guide
The
Upload New Blocking Message File
requires the name of the
desired voice message file. The file needs to be in PCMU (CCITT u-
law, 8 kHz, 8 bit Mono) wave format, otherwise the system will
prevent uploading it and “Invalid audio file, or format is not
supported” warning message will be received. The system also
prevents uploading if there is not enough space available for the
corresponding extension. The “You do not have enough space”
warning will then be received.
Choose File
is used to browse custom voice message used for
outgoing call blocking.
The
Download Custom Blocking Message File
link appears only if
a file has been previously uploaded. This link is used to download
the audio file to the PC and opens a window where the saving
location can be specified.
Fig.III- 24: Outgoing Call Blocking page
Distinctive Ringing
The
Distinctive Ringing
service of QX IP PBX allows you to assign
different ringing patterns to individual callers. The
Distinctive
Ringing Settings
page provides the necessary settings to receive a
distinct ring
depending on the caller’s address.
Please Note:
Refer to the “
Epygi IP PBX Features on Epygi
Supported IP phones
” document on the Epygi’s Web portal for more
details on the list of IP phones that supports Distinctive Ringing.
The
Enable Service
checkbox enables the service. Other components
on this page are available only when this checkbox is selected.
Nick Name
requires the callers nickname (if any).
Ringing Pattern
lists the possible ringing patterns that may be
assigned to a specified caller.
Fig.III- 25: Distinctive Ringing page
Please Note:
All phones attached to the extensions in the Many Extension Ringing/Call Hunting table will ring with the pattern defined for the individual
caller to that extension.
Call Hunting
The
Call
Hunting
service provides the possibility of an incoming call consecutively ringing on several extensions depending on the calling party. The
Call
Hunting
page contains a table where all the participants in the call hunting group for the corresponding extension should be defined.
Attention:
By configuring the
Call
Hunting
service,
Unconditional
Call
Forwarding, Find Me/Follow Me
and
Many Extensions Ringing
automatically will be disabled on the current extension.
Selecting
Enable Service
activates the Call Hunting service on the
current extension.
The table displayed here lists the extensions where the call must be
consecutively duplicated in case of a call from the corresponding
caller.
Status
indicates if the extension is
Attached
,
Not Attached
or
Attendant
. An extension cannot ring if it is
Not
Attached
. The
administrator must attach it to the line from the
Extensions
Management
page.
When the order of entries in the
Call To
table is defined in the
consecutive ringing order, the
Move Up/ Move Down
becomes
available. This will move the checked
Call To
extension either one
level up or down.
Fig.III- 26: Call Hunting page
