Epygi Manual III User Manual Download

Page: 34 / 50

QX50/QX200/QX2000; (SW Version 6.0.x)

QX50/QX200/QX2000 Manual III: Extension User’s Guide

Incoming Call Blocking

allows blocking unwanted incoming calls for a QX IP PBX extension. This page provides the necessary settings for incoming call

blocking. It indicates if the service is enabled for the particular caller and whether or not the custom message will be used to inform the caller about the

call being blocked. If the service for the particular caller has been enabled by the administrator and has been stated as protected, the user cannot disable it.

Please Note:

The administrator can protect the service from being disabled by you. Contact the administrator if callers complain that they cannot reach

you.
The

Enable Service

checkbox selection blocks all calls to the current extension using the corresponding

Address

listed in the Caller ID Based Services

table where the Incoming Call Blocking service is configured.
The

Send Message to Caller Party

checkbox is available when the service is enabled and initiates a message to inform the caller that their line has been

blocked. Otherwise, the calling party will be disconnected without notification.
The

Restore Default Blocking Message File

restores the default incoming call blocking message if another user-defined file has been previously selected.

When the checkbox is selected, the file upload possibility will be disabled.

The

Upload New Blocking Message File

requires the name of the

desired voice message file. The file needs to be in PCMU (CCITT u-

law, 8 kHz, 8 bit Mono) wave format, otherwise the system will

prevent uploading it and the “Invalid audio file, or format is not

supported” warning message will be received. The system also

prevents uploading if there is not enough space available for the

corresponding extension. You will then receive the “You do not

have enough space” warning.

Choose File

is used to browse custom voice message used for

incoming call blocking.
The

Download Custom Blocking Message File

link only appears

if a file has been previously uploaded. The link is used to download

the audio file to the PC and opens a window where the saving

location can be specified.

Fig.III- 23: Incoming Call Blocking page

Outgoing Call Blocking

allows blocking unwanted outgoing calls for a QX IP PBX extension where the destination

Address

service is configured. This

page provides the necessary settings for the outgoing call blocking service. It indicates whether service is enabled for the particular caller and whether or

not a custom message will be used to inform caller about the call being blocked. If the service a particular caller has been enabled by administrator and has

been stated as protected, the user cannot disable it.

Please Note:

The administrator can protect the service from being disabled by you. Contact the administrator if you have problems establishing a certain

call.
The

Enable Service

checkbox selection blocks all calls to the corresponding

Address

listed in the Caller ID Based Services table associated to the

corresponding extension.
The

Send Message to Caller Party

checkbox is available when service is enabled and it initiates a message to inform the caller that their line has been

blocked. Otherwise, the calling party will be disconnected without a warning.
The