Epson XP-4200, User Manual

Page: 80 / 181

When Replacing a Computer
You need to install the printer driver and other software on the new computer.
Access the following website, and then enter the product name. Go to Setup , and then start setting up. Follow the
on-screen instructions.
https://epson.sn
Saving Power
The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it off automatically if it is not
connected to the network for 30 minutes.
1.
Select Settings on the home screen.
To select an item, use the
u d l r
buttons, and then press the OK button.
2.
Select
Basic Settings
.
3.
Do one of the following.
❏
Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected .
❏
Select Sleep Timer or Power Off Timer .
Note:
Your product may have the
Power Off Settings
or
Power Off Timer
feature depending on the location of purchase.
4.
Select the setting.
Disabling your Wi-Fi Connection
If you used to use Wi-Fi (wireless LAN) but no longer need to do so due to a change in connection mode and so
on, you can disable your Wi-Fi connection.
By removing unnecessary Wi-Fi signals, you can also reduce the load on your standby power.
In These Situations
>
Disabling your Wi-Fi Connection
80