Epson XP-4200, User Manual

Page: 143 / 181

❏
Do not touch the sections shown in the illustration. Doing so may prevent normal operation and you may get
smeared with ink.
❏
Do not drop the maintenance box or subject it to strong shocks.
❏
Do not replace the maintenance box during printing; otherwise, ink may leak.
❏
Do not remove the maintenance box and its cover except when replacing the maintenance box; otherwise ink
may leak.
❏
When the cover cannot be reattached, the maintenance box may not be installed correctly. Remove the
maintenance box, and re-install it.
❏
Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
❏
Do not touch the openings in the maintenance box as you may get smeared with ink.
❏
Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box
will have solidified and no more ink can be absorbed.
❏
Keep the maintenance box out of direct sunlight.
❏
Do not store the maintenance box in high or freezing temperatures.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how often this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
When a message is displayed prompting you to replace the maintenance box, refer to the animations displayed on
the control panel. The need for replacement of the box does not mean that your printer has ceased to operate in
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
143