127
Setting
Options
Description
Advanced Media Setting
Platen Gap
Select a larger value if print results are
smudged by print head strikes
Top/Bottom Margins
The
Standard
margins are as follows for the
top and bottom:
• CAD/line drawings: 3 mm
• Other: 30 mm
Select a different value as necessary.
Note:
Left and right margins are always 3
mm.
Back Tension
Select
High
or
Extra High
if paper wrinkles
during printing
Drying Time
Drying Time per Pass
: Select from 0 to 10
seconds for the amount of time the print head
pauses to allow drying after each pass
Drying Time per Page
: Select from 0 to 60
minutes for the amount of time the printer
pauses to allow drying after each page is
printed
Auto Cut
Select
On
to automatically cut roll paper after
each page is printed, or select
Off
to cut paper
manually
Restore Default
—
Restores the custom setting to the defaults
Universal Print Settings
Adjust these settings as necessary when printing in HP-GL/2 or HP RTL mode, or when using AirPrint.
Setting
Options
Description
Paper Source
Roll Paper
Auto Sheet Feeder
Cut Sheet (1 sheet)
Select the paper source from which you want
to print
Summary of Contents for SureColor T2170
