Epson SureColor F2000 Series User Manual Download Page 40

Page: 40 / 175

Align the replacement platen to fit into the holes in the moveable base and place the platen on the
printer.

For best results, always align the print head after replacing the platen with a different size.

Parent topic:

Loading the T-shirt

Related concepts

Print Head Alignment

Loading a T-shirt on the Platen

Before printing, carefully load a T-shirt on the platen.

Note:

For information about loading a sleeve platen, see the manual supplied with the sleeve platen.

If the platen is not in the forward position, press the

moveable base button to move the platen

forward.

Summary of Contents for SureColor F2000 Series
















































































































































































Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands

Epson SureColor F2000 Series, User Manual

Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands