Epson SureColor F2000 Series User Manual Download Page 111

Page: 111 / 175

Cleaning Around the Print Head

Clean around the print head to remove any lint or fibers that have accumulated around the print head
nozzles.

Let the ink cleaning solution soak into a new, large cleaning stick.

Turn on the printer.

Press the

maintenance button.

The Maintenance menu appears.

Press the up or down arrow button to select

Cleaning around head

, and press the right arrow

button.

Press the up or down arrow button to select

Yes

, and press the

button.

The platen and print head move to the maintenance position.

Caution:

Do not move the print head or the platen manually. A malfunction may occur.

Open the printer cover.

111

Summary of Contents for SureColor F2000 Series
















































































































































































Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands

Epson SureColor F2000 Series, User Manual

Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands