Epson SureColor F2000 Series User Manual Download Page 154

Page: 154 / 175

Speak to a Support Representative

Before you call Epson for support, please have the following information ready:

• Product name

• Product serial number (located on a label on the product)

• Proof of purchase (such as a store receipt) and date of purchase

• Computer configuration

• Description of the problem

Then call:

• U.S.: (562) 276-1305, 6 AM to 6 PM, Pacific Time, Monday through Friday

• Canada: (905) 709-3481, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may
apply.

Purchase Supplies and Accessories

You can purchase genuine Epson ink and paper at

epson.com/ink3

(U.S. sales) or

epson.ca

(Canadian

sales). You can also purchase supplies from an Epson authorized reseller. To find the nearest one, call
800-GO-EPSON (800-463-7766).

Parent topic:

Solving Problems

Related references

Optional Equipment and Replacement Parts

154

Summary of Contents for SureColor F2000 Series
















































































































































































Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands

Epson SureColor F2000 Series, User Manual

Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands