Epson SureColor F2000 Series User Manual Download Page 86

Page: 86 / 175

Replacing the Head Cleaning Set

Replace the head cleaning set when you see a message on the control panel.

Note:

The printer warns you when the head cleaning set is running low. The printer warning system may

not function properly if you do not follow the correct procedure for replacing the head cleaning set.

Turn on the printer.

Press the

maintenance button.

The Maintenance menu appears.

Press the up or down arrow button to select

Head Cleaning Set

, and press the right arrow button.

Press the right arrow button again.

Press the up or down arrow button to select

Yes

, and press the

button.

The platen and print head move to the maintenance position.

Note:

Never move the print head or platen manually; otherwise a malfunction may occur.

Replace the parts of the head cleaning set in the following order:

• Wiper unit

• Anti-drying caps

• Flushing pad

Replacing the Wiper Unit and Anti-drying Caps
Replacing the Flushing Pad

Parent topic:

Maintenance

Replacing the Wiper Unit and Anti-drying Caps

When you replace the head cleaning set, begin with replacing the wiper unit and the anti-drying caps.

Summary of Contents for SureColor F2000 Series
















































































































































































Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands

Epson SureColor F2000 Series, User Manual

Search results

Summary of Contents for SureColor F2000 Series

Reviews:

Related manuals for SureColor F2000 Series

Brands by name

Popular brands