Epson Stylus Pro 7450 User Manual Download Page 150

Page: 150 / 373

The Control Panel

150

Paper check light
(red)

On:
No paper is loaded in the manual feed when
Sheet

is selected as the paper source.

Roll paper is out when Roll Auto Cut On

Roll Auto Cut Off

is selected as the paper

source.
The selected paper source (Roll Auto Cut On

/Roll Auto Cut Off

/Sheet

) does not

match the paper source in the printer driver.
The paper lever is in the released position.
The loaded paper is too thick for head
cleaning.

Flashing:
Paper is jammed.
Paper is almost out.
Paper is not cut correctly after the print job
when Roll Auto Cut On

is selected as the

paper source.
Paper is not loaded straight.
Paper is not detected.
Cut sheet is not ejected correctly.

Ink check light
(red)

On:
The installed ink cartridge is expended.
The installed ink cartridges cannot be used
with this printer.
The maintenance tank is full.

Flashing:
The installed ink cartridge is nearly expended.
The maintenance tank is nearly full.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands