Epson Stylus Pro 7450 User Manual Download Page 272

Page: 272 / 373

Maintenance and Transportation

272

3. If some powdery paper dust is stuffed in the platen, use

something like a toothpick to remove it. Close the front cover.

4. Remove the paper basket. Then clean away any dust or dirt

around the leg assembly using a soft brush.

5. If the outer case is dirty, clean it using a soft, clean cloth

dampened with mild detergent. Keep the ink compartment
covers closed to prevent water from getting inside.

6. To wash the paper basket, remove the shafts from the basket

and then wash it with mild detergent.

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands