Epson Stylus Pro 7450 User Manual Download Page 193

Page: 193 / 373

The Control Panel

193

3. Press the

Paper Feed

button or

Paper Feed

button to

display

ROLL PAPER COUNTER

, and then press the

button.

4. Press the

Paper Feed

button or

Paper Feed

button to

select the length of the roll paper (between 5 and 99.5 m or 15
and 300 ft), and then press the

Enter

button.

5. The screen changes so that you can select the alert value. Press

the

Paper Feed

button or

Paper Feed

button to select

the alert value (between 1 and 15 m or 3 and 50 ft).

6. Press the

Enter

button to set the alert value.

7. After you set the alert value, press the

Pause

button to

return to the

READY

state.

Maintenance Mode

Maintenance mode setting procedure

This section describes how to enter Maintenance mode and make
settings with the buttons on the control panel.

To make Maintenance mode settings, follow the steps below.

Note:

❏

Press the

Paper Source

button to return to the previous step.

❏

While you are using the printer in Maintenance mode, no error
message (if any) appears on the LCD panel. Therefore, use
Maintenance mode when the printer is in the normal state (no error).

Summary of Contents for Stylus Pro 7450






















































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands

Epson Stylus Pro 7450, User Manual

Search results

Summary of Contents for Stylus Pro 7450

Reviews:

Related manuals for Stylus Pro 7450

Brands by name

Popular brands